Clydesdale
HearthStone’s classic fireplace insert. Full cast iron construction, soapstone lining, and TruHybrid™ technology make this insert top of its class.
TruHybrid Efficiency
Clean-burning, highly efficient, and easy to operate, the Clydesdale uses our TruHybrid™ technology. Engage the catalyst and turn your stove down for slow and efficient overnight burns.
Open view of the fire
The Clydesdale’s large open window lets you see as much fire as possible. Enjoy the ambiance of a fireplace and the efficiency of HearthStone.
Soapstone firebox
Burn up to 24 inch logs in the soapstone lined firebox. Soapstone retains the maximum heat from your fire and radiates steady warmth as your insert burns.
Specifications
Blower
Included
BTU
Up to 75,000
Efficiency
79%
EPA Certified
1.16
Finish
Brown Enamel, Matte Black
Firebox Capacity
2.4 cu ft
Flue Exit Diameter
6
Flue Exit Location
Top, 2 positions
HeatLife
24 Hours of heat
Heats up to
2,000 sq ft
Maximum Log Length
22"
Model
8492
Stove Type
Wood Fireplace Insert
Weight
550 lbs
Accessories
Surround Extension
94-5990010
Surround Base Caps
94-5970610/20
Mantel Shield
94-79700
Installation
Minimum Fireplace Opening
32 1⁄2″ Width* x 23 1⁄4″ Height* x 13″ Depth
* Hearth may taper to 27″ Width x 21″ Height at the back wall
Minimum Hearth Protection
Masonry hearths 7″ or higher: Ember Protection Only
Hearths less than 7″ tall: Insulation Required, R-1.5
Clearances
Clearances
8″ combustible mantel from bottom of insert – 39¼”
8″ shielded mantel from bottom of insert – 30¼”
To side trim from side of insert body – 8″
To side wall from side of insert body – 11″
TruHybrid™
Ultra Clean Combustion Systems
All of our wood stoves exceed 2020 EPA standards so you can be sure they burn clean today and for many years to come.
Our TruHybrid™ stoves burn cleanly and efficiently before and after you engage the catalyst. The system combines primary and secondary combustion with tertiary combustion using a catalyst to take care of any unburned smoke particles and gases.
